|
Products In: DIAMOND PISTONS (Page 3 of 3)
|
|
$819.00
Ford BB 552ci 4.420" Bore flat top pistons with int & Exh valve pockets, 4.500" crank with 6.800" rod = 1.245" CD, comes with pins, locks & moly +.005" file fit rings.
|
|
$842.40
|
|
$925.60
Ford 427SOHC Pistons 4.250 bore, 30cc dome, for 4.250 crank x 6.700 rods, comes with moly file fit rings. Set 8.
|
|
$1082.90
Custom Blower pistons, 4.375" bore, 31.8cc dome =11:1 comp @ 121cc, 1.345" comp height, H-13 tool steel .990" .205w pins with notched buttons
|
|
$741.00
4.030", 6cc dome 12.6:1 @ 64cc, 9.27" pin, support rails, 3.750 crank x 6.000" rod @ 9.200" deck = 1.315" CH, 1/16 1/16 3/16 ring pack, use rings # JES100S8-4030-5
|
|
$1297.40
Use rings # DIA09024600
|
|
$1101.10
Built for Sean Ireland Invoice # 500671 Jan 23, 2009. none
|
|
$539.50
Chev SB Dart / Buick 15 deg 4.040" 24cc dish, 11.3:1 @ 42cc with 3.750" crank, 6.000" rods, 1.115 pin height nitrous pistons, no pins or rings.
|
|
$964.60
Chev BB 4.560 flat top with 1.210" CD, Pro Select moly rings (8)
|
|
$179.40
4.000", dome 11.5:1 @ 58cc, 9.12" pin, 3.000crank x 5.090" rod @ 8.200" deck = 1.600" CH, 1/16 1/16 3/16 ring grooves. Single piston with pin
|
|
$869.70
4.000", dome 11.5:1 @ 58cc, 9.12" pin, 3.000crank x 5.090" rod @ 8.200" deck = 1.600" CH, 1/16 1/16 3/16 ring grooves. Job # 60928
|
|
$976.30
4.000", 6cc dome 13:1 @ 62cc, 9.27" pin, support rails, 3.500crank x 6.000" rod @ 9.200" deck = 1.240" CH, 1/16 1/16 3/16 moly file fit rings.
|
|
$912.60
Ford Cleveland 421ci dish pistons -14.5cc, 4.125" bore, 4.000 crank, 6.125" rod, 1.065" pin height suits 9.200 deck, 10.69:1 @ 64cc, comes with pins, pin fit, ring support rails & double spiro locks, Sold as Set of 8
|
|
$1064.70
Chev SB 23 deg 4.155 bore, Side gas ported dome pistons, 14cc dome 14.5:1 @ 70cc, 4.000" crank with 6" rod, 4130 pins, oil support rails, .043 x .043 x 3mm file fit moly rings. Sold as set of 8 with rings.
|
|
$552.50
Ford Cleveland 351c Flat Top pistons, 4.030" bore, 3.850 crank, 6.200" rod, 1.065" pin height suits 9.200 deck, 10.69:1 @ 72cc, comes with pins, pin fit, ring support rails & double spiro locks, Sold as Set of 8
|
|
$1580.80
Custom BBC dome Blower Pistons x 10, Pin fit, 8 x H13 pins, 16 x buttons, AP Steel rings 0919-4500.
|
|
$852.80
Custom SBC 4.065" 18 deg, 13cc dome @ 43cc chamber = 15.5:1, side gas port, Pin fit, No Pins .927 x 2.500, 1.590" comp distance, .043 x .043 x 3/16 ring grooves, Set of 8.
|
|
$132.60
Custom Lexus 4.0L Flat Top Blower Pistons 3.469", Includes H9272750185 pin, Pin Fit, Buttons (2), uses 5.7" rod, sold Each. -22 Requires Special Order Rings
|
|
$936.00
Diamond Forged Pistons Ford 351c 4.030 Dish -14.5cc, 1.065 CH, .927 pins, with moly rings, Set 8
|
|
$873.60
Diamond Forged Pistons Ford 351c 4.125 Dish -11.5cc, 1.240 CD, 1/16 1/16 3/16 ring grooves, .927 pins, Oil Rail Supports, Double spiral locks, Sold as Set 8
|
|
$942.50
BBC 4.500" NOS 34cc Dome 1.240 CH, suit 4.500" stroke x 6.700" rod in 10.200" deck block, H-13 pins, Gas ports, comes with, Sold in set of 8.
|
|
$980.20
Diamond Blower pistons Chev SB 18 Degree, 4.145" Bore, 8.1cc D-Shaped Dish, 10.5:1 @ 66cc, 3.750" x 6.000" = 1.115 CH, H-13 pins, Double spiral locks, 1/16 1/16 3/16 ring pack, oil support rails (8) Use rings # TOTCS7560-15
|
|
$729.30
Diamond 2618 forged pistons for forced induction, Ford 302w -6cc Flat Top, 4.125 x 3.400 x 5.400 = 1.090CD, 463ci 11:1 @ 58cc, rings down .260", 1/16 1/16 3/16 ring pack, Sold as set of 8.
|
|
$945.10
Chev SB 23 deg 4.125 bore, Flat Top Blower pistons, -8cc @ 70cc, 3.480" crank with 6" rod, H-13 pins, oil support rails, Double spiral locks, Requires 1/16 1/16 3/16 file fit AP Steel rings # TOTCS0690-35, Sold as set of 8.
|
|
$1105.00
|
|
$1034.80
Chev BB 13 deg 4.500" bore, Dish Blower pistons, H-13 pins, Double spiral locks. Requires 1/16 1/16 3/16 file fit AP Steel rings # TOTCS9190-255, Pistons Sold as set of 8.
|
|
$310.70
|
|
$148.20
|