END55-108-426 - Manifold throttle bracket

$12.50

END55-500 - Linkage w/ends 2 x 4 in line 4150 carbs

$25.00

END55-501 - Linkage kit 6-71in-line 2 x 4150 carbs

$96.25

END6001-10 - Check valve -6 10psi (brass)

$33.75

END6001-15 - Check valve -6 15psi (brass)

$33.75

END6001-2 - Check valve -6 2psi (brass)

$37.50

END6001-5 - Check valve -6 5psi (brass)

$37.50

END6001A-10 - Check valve -6 10psi (aluminium Black)

$35.00

END6002-160 - Check valve -6 160psi (brass)

$52.50

END6002ZZ - Bearing for 80A pump (2 required)

$12.50

END6007-250A - Check valve spring -6 (90 to 250 lb)

$1.25

END6007-38A - Check valve spring -6 (44 to 80 lb)

$1.25

END6007-K - Check valve spring kit -6 (1 to 250 lb)

$10.00

Kit contains 8 x #6 springs; 3=1-1/2-5lb, 10=5-12lb, 12=9-25lb, 15=15-50lb, 25=6-25lb, 38=44-80lb, 40=6-40lb, 250=90-250lb. Use shim kit # 6006-K to adjust pressures.

END6009-15 - Check valve -8 port check (15psi)

$53.75

Pre set at 12 psi. Check pressure before use.

END6009-8 - Check valve -8 port check (8psi)

$53.75

END6010-8 - Check valve -8 hi speed (8psi)

$53.75

END671GA - Injector Bug / Bird hat spacer gasket

$7.50

END7000 - Hi speed tee fitting -10

$20.00

-10 bulk head to -10an male with hi speed on side. Requires #END7003 pill holder & #END6002 check valve.

END7001C - Hi speed tee fitting -8 double tee

$25.00

END7001CC - Hi speed tee fitting -8 dbl tee on side

$25.00

END7002A - Hi speed tee fitting -6 to -8 bulkhead

$20.00

END7007-100 - Nozzle jet #100-Each

$5.00

END7007-22 - Nozzle jet #22

$5.00

END7007-24 - Nozzle jet #24- Each

$5.00

END7007-26 - Nozzle jet #26- Each

$5.00

END7007-28 - Nozzle jet #28- Each

$5.00

END7007-29 - Nozzle jet #29- Each

$5.00

END7007-30 - Nozzle jet #30- Each

$5.00

END7007-31 - Nozzle jet #31- Each

$5.00

END7007-32 - Nozzle jet #32- Each

$3.75